ParkerRocker
Well-Known Member
- Joined
- March 9, 2008
- Messages
- 182
- Reaction score
- 1
- City, State
- Hayden, ID
- Year, Model & Trim Level
- 92 Explorer Sport
I have seen really two major methods of disabling the door ajar ding in cars. Either cut the wire or pull the fuse. Unfortunately in many cars the circuit that this is on is also shared by another function. in the case of a first gen explorer, it is the lights on ding. Personally i need that, So in order to correct this in my 92 explorer i installed a switch.
1. Locate the sound box that emits the ding. it should be under the dash and looks like this:
2. The wire that you need to cut is the red and pink wire. Just put a switch in line and mount it.
I put the on position on my switch so that it faced the engine, that way if i ever bumped it with my knee it would be in the on position.
1. Locate the sound box that emits the ding. it should be under the dash and looks like this:
2. The wire that you need to cut is the red and pink wire. Just put a switch in line and mount it.
I put the on position on my switch so that it faced the engine, that way if i ever bumped it with my knee it would be in the on position.