Auto & Truck Parts For Sale

SOLD I am posting this for a friend, it's not mine. And not in my posession. I am just helping a friend get it posted. Here's the story: The truck was wrecked, but complete and running. He has the whole engine. The EE X-charger kit did not come with a chip since it had low boost with the stock pulley. The belt did break but he will ship it for the part # and length reference. All parts are now removed. All bolts bagged and tagged. This is the rectangle inlet blower with the coated rotors. Rotors are excelent, no chips or flakes or anything. $1500 shipped insured. If it doesn't sell here, he will put it on eBay....but he is trying to avoid paying the listing fees. All pics that I have I posted. I will see if I can...

Hello, I sold my explorer :( & now i am selling my very rare explorer express xcharger kit for the 5L v8 second gen explorers. This kit was removed from my local professional HI-Performance shop they told me all the bolts & brakets are included. I have included the stock coils. The supercharger has a 2" pulley & upgraded the cheap plastic idler pulleys it comes with to steel, I made about 8-9 PSI about 350 RWHP with a 347 Engine. It may make more boost on the 302. i have had this kit on for approx. 5 years, I am the first owner of it, it is a low mileage kit, I only put about 5k miles on - it was not my daily driver. it works great. This kit can be bolted onto a stock motor with no tuning with the 3 inch pulley (5-6lbs of boost). i...

Curious if there is interest in the following. Please let me know, if so I can start selling these soon. Having trouble with your A4LD not shifting right? Want it to shift like it should without paying over $1000 for a rebuild by some shady transmission shop? I can provide rebuilt and upgraded A4LD valve bodies (complete assemblies with solenoids) and all necessary new gaskets to install them, with instructions. Below is what I will do: -Start with good 93/94 style valve body, separator plate included -Cleaned, stripped down, ALL components checked and cleaned, including solenoids -Transgo Shift Correction kit installed (recalibrated spool/valve springs, additional check balls as required, modified check pucks, modified...

I'm selling all the bits that you'd need to install the message centre and electronic automatic climate control into a 2nd gen explorer The only thing I don't have is the sensor for the engine oil level. looking for C$175 Shipped anywhere Si

i have a 4.0 under drive crank pulley that is up for sell.it fits all 4.0 and releases some hp and improves gas mileage.i like it and think it was well worth the money but im going super charged now and cant use it any more:mad: it is used but in perfect shape.i paid all most $300 for it a couple years ago.it still list at about $280.i want $200 plus shipping http://www.summitracing.com/parts/ASP-526400

I bought a parts truck that had a RC 4" lift on it (I already have Duff). The used kit is for sale $200 plus shipping. This kit includes Drop Pitman arm (Pretty sure it came with one but it might be in the Moab parts box) Sway bar drop brackets (one is FUBAR'd as a wheel came off on the previous owner) Beam pivot drop brackets (full bracket, not the plate extension) Radius arm drop brackets AAL's (currently mounted in a leaf pack, I can pull them out to reduce shipping) 4" lift coils Shocks I will try to include the nut and bolts but the buyer should consider new grade 8 hardware. Install instruction here; http://www.tuffcountry.com/NewFiles/24860.pdf Recommended but not included; Extended brake lines

so ive been not wanting to do this but im going to try and sell these wheels...i bought them about 2 yrs back and theyre still in the original shipping boxes i received them in...wheels are sand blasted...i wanted to powdercoat them flat black but didnt want to start this project until my other wheels sold but they did not...still trying to sell those also...i cant get a picture of them due to the snow and ice covering my shed in the back yard...if anyone is interested and lives near by nyc i will try to attempt to take them out...trying to get what i paid for them which was 600...to ship its most likely going to cost some money...will try and dig them out this sunday and get some pics up if your interested and live locally to check...

I just took delivery of my new 2013 Explorer Sport. I had the dealership change out the wheels/tires immediately. As a result I have a brand new set of 4 Explorer Sport wheels, with factory tires, and pressure monitor sensors for sale. I was told Ford gets around $750 per wheel alone (not including tires and sensors) but I am going to ask $2,000 for the entire package - wheels, tires, sensors - all mounted, balanced, and ready to install with 0 miles on all of it. I would prefer a local sale in Michigan where we could meet and exchange wheel package for cash, but if someone is willing to make arrangements to ship I could go that route also (I do have Paypal).

So here's the story. The other night, I was backing out of my driveway in Southampton, and I backed into one of the trees we have at the end of our driveway. The left rear of the car is fine, but the right side needs some body work done or a new back right side window and trunk lid. Come see for yourself though, because it looks better in person than in the pics. The Explorer IS drivable. The Explorer has 181,000 Miles on her. She's 100% Rust free (only has 1 small 1" spot of surface rust on the back bumper...seriously!, and still runs strong with MANY new parts! Some of which I can't think of right now. -The Explorer is lifted 2" (Using WARRIOR 2" Shackles in the Rear. Will sell for the right price!!) -Viper Alarm/Remote Start -New...

I have a brand new, never opened sport trac rear bumper impact bar, part # 17906. It is the piece that is behind the rear bumper. It is a Ford part that I had ordered then was rear ended the day I picked it up so now insurance is taking care of it and since its a special order part they wont take it back. I want $275 for it plus shipping. It is originally $350 from Ford. PM if you have any questions, thanks.

Parting out 2002 4dr Explorer 4.0 v6 4x4 I just picked up this explorer from a fellow forum member that bought the truck for for the transmission and wheels and tires and here I am to sell what's left before it hits the scrapper. The engine is BAD. The truck is 4wd, Leather, third row seating, rear a/c and a few other options. The truck has 143k miles and was a 1 owner truck. Some prices listed below, I have way more parts than what's listed. Discounts on multiple parts, Discounts on parts picked up in va beach paid with cash. I can send individual pics through email at Mountyon35s at hotmail.com TRUCK HAS BEEN SCRAPPED Seats - SOLD Air bags - $50 each Center console - $80 Steering column complete w/ key - $100 Rear bumper...

$200 firm = shipping UpS ground 4 or 6in ttb brackets new Skyjacker and Duff brackets

Here is everything you need to swap a manual transmission into a 02 or 03 (possibly late 01) Explorer Sport or Sport trac. I want to sell this complete and not part out as some of these items are very hard to get (like the EGR tube). All wires/plugs are good and everything was tested before removal. It all came from a 2003 sport with 88k miles. This all should make the swap completely bolt in. I will sell the "kit" minus the transmission as I'm sure someone interested might need a 4x4 trans. Swap kit $350 plus shipping($75-150) includes.... Steering column complete with 2 keys (only 1 key is programmed to computer) Shifter, boot and mount plate Engine and Trans wiring harness w/PCM Instrument cluster PRND21 delete Starter (manual...

Set of 4, with tires, and TPMS sensors. $1995 obo Local pick up only Si

Have a complete front superlift kit up for grabs. Some brakets have been powdercoated blue as seen in picture. Has multi drilled spindles so 12" rotors can be ran if you have 16" wheels. I am missing sway bar links but those are easy to make. Have rear Superlift shocks to throw in also, need lower bushings though SOLD