Line82
Member
- Joined
- May 22, 2013
- Messages
- 17
- Reaction score
- 0
- Year, Model & Trim Level
- 2006 Explorer XLT 4x4
Hello, I have an '06 Explorer XLT with a 4.0L with DTC P0442. I can hear a pinhole leak coming from either under the hood or floor board area. I am not sure if it has to do with the Evap code, but I bet it does though. Are there any common problems with vapor hoses leaking or something similar?
I have replaced: gas cap, evap purge valve (located under the hood), the vacuum supply line for purge valve, A/C check valve (for possible supply vacuum leakage causing the code?)
The only line I haven't replaced is the fuel vapor line running to the purge valve (IF in fact that pinhole leak is coming from the evap system, and not another system)
Is the Evap solenoid (located on the frame rail down by the fuel tank) known to go bad causing this code?
Thank you for any information you may have.
I have replaced: gas cap, evap purge valve (located under the hood), the vacuum supply line for purge valve, A/C check valve (for possible supply vacuum leakage causing the code?)
The only line I haven't replaced is the fuel vapor line running to the purge valve (IF in fact that pinhole leak is coming from the evap system, and not another system)
Is the Evap solenoid (located on the frame rail down by the fuel tank) known to go bad causing this code?
Thank you for any information you may have.