Smoked Tail Lights

[Hartman]

AMerrBauer, signature lines are to be kept 6 lines or less.

 

[4LF]

JDM in a can! Hell yeah!

 

[dropped02sport]

*note* the red color in my monitor is out, so anything with a red coloration looks black, I'm not color blind, honest **

With that said, I can't tell if you did the 3rd brake light or not. If you didn't, maybe tint that while your at it to help further the black out look

 

[4LF]

To get that smoked mustang look, you can also take your lights apart (Bake in the oven at 225 for about 10 minutesor use a heat gun), tape the inner reflective area off, and spraypaint the outer silver part black. Just use silicone (A LOT) to reseal them.

 

[Black Magic]

dropped02sport

I can't tell if you did the 3rd brake light or not. If you didn't, maybe tint that

As the others can see the Third break light is under the cover of the Saleen wing. So it is always in shade and looks to match the tail lights so I didn't need to spray it. Plus, since it is under the Saleen wing it would be a PITA to remove to spray, and too tight to spray there.

 

[jssong]

hey matt.. any way u would sell me ur tint spray.. ?

 

[Spas]

Black magic, where did you get that spray from?

 

[Black Magic]

As eariler stated: "Well my Smoke Spray came in today from (dead link)

The write up is listed here: [
Let me know if you need any help or have any questions.

 

[Spas]

Thanks, 'Magic! (I must have missed that one )

 

[Black Magic]

My pleasure!