problem

Hi all, well i replaced my original valve body for one with a shift kit and i installed it correctly but when i finally try to drive it it Wont engage into any gear, and when i put it in overdrive i can feel the car slightly shake but it doesnt move, So i turned the truck off and climbed...

i have a 97 x sport. today i was driving on ice and all of a sudden i lost my brakes and heard the abs pump cycling. I looked under the hood and saw one of my 4 green anodized "caps" on my abs pump was missing. i dont know where it went or anything, it was just gone and fluid was leaking out...

ive got a 96 explorer, 4.0 4x4, and i was testing out the 4wd, it worked, then when i put it back in 2wd it never switched over. once my 4wd light came on i pulled over and noticed that it was still in 4low when i had it in 2. any suggestions to get it out of 4?

Just picked up a V8 06 XLT yesterday with 35,000 miles on it. One problem I am noticing is that when I press the 4x4 buttons, nothing lights up on the dash. When putting it in 4x4 low I can hear it click in by the button but pressing 4x4 high I cant hear anything engage. The traction control...

I've got a problem with my Explorer starting. I've had her for about a year now, and the problem started almost as soon as I got her. I have had to turn the key quite a few times to hear the fuel pump "whirr" so that I can start it. Got pissed off with this mode of driving, so I first...

I am rebuilding a 4R55E transmission from my 1998 Explorer 4WD 4.0L. I bought a rebuild kit for it that only requires 4 steel & 4 friction clutches (for a 3.0L engine). My original assembly had 5 of each. Will it be a problem if I continue with this kit?

I am rebuilding a 4R55E transmission from my 1998 Explorer 4WD 4.0L. I bought a rebuild kit for it that only requires 4 steel & 4 friction clutches (for a 3.0L engine). My original assembly had 5 of each. Will it be a problem if I continue with this kit?

I am rebuilding a 4R55E transmission from my 1998 Explorer 4WD 4.0L. I bought a rebuild kit for it that only requires 4 steel & 4 friction clutches (for a 3.0L engine). My original assembly had 5 of each. Will it be a problem if I continue with this kit?

So yesterday on my way home my battery light came on. Before I go on any further I just purchased a brand new battery 2 months ago, there is no corrosion or problem with the battery itself. My problem is that when I go over 2000RPMS the light goes off and when im stopped or idleing or under...

Hello; new to the forum, you people have a great site to help each other out. I own a 07 Explorer Eddie Bauer 4x4 V8. It has been a really great car and still is, but with a gripe that is. The battery was defective due to age and I had the car with the passenger window open for two days...

1994 Ford Explorer Sport I had just pulled off the highway and began to accelerate down the road when a loud noise began. It really only occurs when I am accelerating. I pulled over and opened the hood and noticed what seemed to be a hole in a metal pipe on the driver side of the engine. The...

I have a '94 EB and have been having some problems recently. When I am breaking (i.e. for a stop sign) and have slowed to a near stop my engine will suddenly rev and the truck feels like it's going to accelerate. This only lasts for a second and the truck never actually accelerates and then...

Hey guys - I am obviously a newbie on this board so please move this post to the right place if this isn't it. This is my attempt to describe a problem and a fix, for the benefit of other people. I am going to tell the whole story out so that someone's search terms might come up, wherever they...

hey, i got a 1999 4.0 V6 Ranger that pulls to the right every time i apply the brakes. I'm not quick sure what could be the cause of this. I've been told that it could be a bad tire (which i do have and is being replaced) but i find this not realistic. I'm guessing it has to do with the brakes...

Am I the only idiot to buy these things? I'm asking because I'm having a problem. The problem is the flange that connects the Y Pipe to the Catalytic Converter does not match up, at all. As in the holes don't line up and the center where the actually exhaust comes out doesn't match up. This is...

All, I wanted to inform you of my experience using Turtle Wax F21 Super Protectant Interior Cleaner on my BMW and Ford Explorer. This stuff will ruin your interior! This stuff leaves a white residue that won’t come off. At first I thought it was because it was still wet and would clear...

Hello, 93 Eddie Bauer Explorer 4x4 Automatic trans 4.0 v6 4 door Here's my issue I'm needing some direction on. I got on the interstate for the 1st time yesterday and at cruising speed (65mph) the tranny would go from D to OD, D to OD, D to OD, until I either sped on up or slowed...

A quick question...I've got a 1997 Ford Explorer XLT with Control Trac 4WD. I haven't used the 4WD system in about 7-8 years, (we keep it on the pavement). I just leave the switch in Automatic. Just today, I was turning around in my driveway and just decided to test the system. It worked fine...

Hey all, I had a question regarding my 1998 Ford Explorer V6 4.0 Eddie Bauer edition. Recently, my battery died. When I jumped it and started driving the battery light would not turn off. Then the A/C stopped, then the air suspension, then the front passenger window. After driving further...

So, I've checked my pads and shoes on my brakes, and all seem to be fine, yet when I press down on my brake pedal, I get a wooshing kind of a sound, even when my explorer is in park. When I am driving (or was driving I should say) I get the same sound, and it feels like only my front brakes are...

Aright guys here's the deal, my 2002 Explorer started having this problem about a month ago. While trying to pump gas, the pump clicks of every few seconds as if the tank is full. I tried pulling out the nozzle a little...and still no luck. However, gas does not shoot out of my tank like with...

since I'm asking for glacier991 I guess you pretty much know this is a trans problem. here goes 1998 4.0 4r44(I'm pretty sure) 177k miles regular trans fluid changes and filter changes as well as aftermarket cooler(i put these on every vehicle I own that has an auto trans), trans works...

i bought a set of 95tm heads off of a 96 explorer v6. I thought it was a direct bolt in but there seems to be a problem with the ports that connect from the bottom of the lower intake to the heads. The ports on the heads are rectangular and on the intake there a wierd shape because a bolt seems...

Okay so i have a huge problem. I have a 96' 4.0 that didn't pass smog because the cats are bad. (threw a P0420 code). Apparently, all of the aftermarket cats that an hour long internet search seemed to find, are NOT Cali legal. I called Midas (longshot) asking if they could do it. After...

Hi. My 96 Explorer 4.0 SOHC auto had a 4r55e transmission that died a while ago. I found a 98 5r55e box that was working fine i the donorcar. as i read on this forum, i changed over EPC og TCC valves from the 4 speed box. The intension is to get the 5speed box working as a 4 speed. BUT, with...