brantm21
Member
- Joined
- August 25, 2013
- Messages
- 23
- Reaction score
- 3
- Year, Model & Trim Level
- 98 Explorer XLT 5.0
I sheared a thermostat housing bolt off in the lower intake manifold. So i removed it and replaced the gaskets and took some photos in the process.
Upper Intake already removed.
Lower Intake Removed
Another picture of lower intake removed
Lower Intake 'side' gaskets installed
Front and Rear Lower Intake Gaskets
Sheared thermostat housing bolt
Cutting Sheared Thermostat bolt off
Drilling Center of bolt out
Cleaned old gasket off of lower manifold
Top of lower intake old gasket removed
Lower Intake installed
Upper Intake Gasket removed
Finishing touches
Here she is all done.