Search results

I just recently replaced the two universal joints in the front portion of my rear drive shaft. I replaced them about 3 weeks ago with the brute force joints but now it sounds like they have gone bad again ie. high pitch squeak under acceleration then stops when you reach a certain speed, clunk...

One of the best transactions I have had here, went out and bought a gasket that I would have needed :thumbsup: and refunded extra money left over from shipping :thumbsup: :thumbsup: Thanks

Anybody that has installed the 02+ white gauges ever have any problems with the engine temp gauge as far as reading too high therefore causing the check engine light to come on ? Another problem I have is I accidently popped off the rpm gauge and upon starting up the gauge reads at 3000 rpm and...

Quick question, obviously picture of the tranny with the two lines top and bottom on my 95 sport, does anyone know off of the top of their head which line is the in and which is the out to help the noob. Getting ready to install tranny filter and cooler but don't know how to determine which line...

Alright here's the pics: and here's the lil bast$rd this post is in regaurds to help i'm recieving through chat ;)

Alright long story short got bogged down in a lil mud hole last night and went to use my winch for the first time (warn X8000i) to try and pull me out from a pole and nothing. It worked but there was no pull really at all, didn't even budge, now I wasn't stuck that bad like totally booged down...

Does anyone know if any 1998 explorer came from factory with white face gauges???

Has any one heard of these subs before, listened to them or heard of the brand and their quality? I can get two used 10's, vs series, for $150, but since I have never heard of this brand I'm not sure, any of you guys out there know about these? - Thanx

Alright this saturday or sunday me and one other board member(sberkel) are going out to a lil bogging area off hwy 40, St. Charles MO, if any one is intereasted near the area. ;)

Alright I'm in the garage right now getting ready to put on the passenger side upper ball joint on a 95x and the part I got from advanced is a one piece while the stock is the two piece design, Haynes also shows it being a two piece design, will it make a difference if I put in the one piece I...

Anybody have or used the 50 series, I'm looking for 4 lights to go across my yakima roof rack. I was looking at these or the daylighters(150watt), I want something up there that is going to light up the night and I'm hoping to stick around 200-220 for all four, any suggestions guys?

We just got my head unit installed, what a PITA with that premium sound sh@t :confused: :confused: :confused: now my gauges don't work and my sub pops each time I turn it off, you guys got any ideas, two of my friends that work at stero shops put my head unit in & they said this is one of the...

Alright I got my tire in the air and grease everywhere, long story short had a hole in the outer boot that houses the bearings, got the old boot off but I cant figure out how too get the bearings apart to slip the new boot on or how this works, any ideas guys? - got till tommorrow morning before...

No I'm not asking how to do it :D , about a day or two after I did the twist I have a real rough sound coming from around the wheel area just on one side, it almost sounds like when your pads are about gone and there grinding, but I have checked the pads there fine and I can't find anything...

Does anyone out there have a picture of a 2nd generation with 305/70/16s??? PLEASE PLEASE PLEASE

Alright I got my 3" lift on and let me say that part was cake, now enter bumper night mare, on my 95 I made the bumper brackets from the template on the sight, my real problem is with the front bumper. You have the two ends in the front where the frame turns into the the things that hold the...

Well my 95 is DOD - dead on driveway, it will crank but won't actually start up, this just started happening recently and usually we would just disconnect the battery for a while to reset the computer and after about three tries it would start right up, not the case this morning just a whole...

Well I stripped the interior while doing my bl and now I don't want to put the carpet back in, I get sick and tired of people spilling beer in my car and it smelling like sh@t for the next two weeks, so have any of you guys done anything else like sprayed the frame of put something in place of...

Alright later this evening I will be putting my 3" bl on my 95 sport, any advice you guys can give me before starting as far as problems you encountered or anything that might be outta the ordinary, or too watch out for. Also I got the bumper brackets fabbed and drilled the holes which are only...

I read joes chart on lift and tire size, anyone out there know the chances of fitting 33x12.50x15 on 15x8 rims on a 95 sport with tt/4drleafs/3"bl, without horriffic trimming?

On the newer sports, 99-00, the plastic grill insert that is gray and is a crossed pattern, does that disconnect from the front plastic piece where it is attached? What i'm trying to do is take one of these off a newer explorer and put it on my 95 sport, anyone attempted this or know a link...

I'am planning on installing a 3"bl, 4dr leafs, shackles, shocks, and tt on a 95 sport, is there any particular order I should go in that will make it easier on me? Next question, I have PA bl kit 883, from what I have read, everything will work on my 95 sport from this kit except for the...

Anybody know where to get some good quality cheap leaf springs? My 95's A@@-sag is just unbarable. Starting to look like a mid-aged over weight house wife.

Anybody know where I can get the best deals on some OME shocks?

For those that don't know, http://www.4wheelparts.com/4wpw_home.asp - has free shipping this weekend only on orders!!!:eek: Well already placed two orders and on my way back for a third my poor wallet:smoke: