Search results

Problem is resolved, it was where the rubber piece connects to the steering shafts, the metal tabs were hitting the shaft when you turn. We bent the tabs back a little and it fixed the problem.

Thanks for the info,I'll be doing it this weenkend. Todd

I'm changing the rear end Oil to Moble 1 syn. on my Explorer, it has a limited-slip. Will I need to add any friction modifiers? Thanks,Todd

Yes I used the extension.

I just recently installed a PA Body lift on my '94 Explorer and now when I turn the wheel left or right about 3/4 - 1 turn it is hard to turn if I continue it turns easy then happens again in about the same amount of turns. I did a search and found Rookie's Steering Shaft swap from an older...

I checked the hubs on my Suburban after a 20 mile drive and they were not even close to being as hot as the Explorers. Todd

I just finished my body lift and coil spacers, just put on new 32" tires mounted on 8" rims then took her for a 6-8 mile spin. When I pulled into the garage to check the lug nuts both front hubs were very hot, to hot to touch for more than 4-5 seconds. Any ideas why they are this hot or is this...

My '94 limited came with a factory limited slip, how can I tell if still works? It has 110K miles on it. Also can I replace it with a locker? Thanks,Todd

My 94 has the famous drivers side sag in the rear leafs and I will be installing a SuperLift 5.5 lift in the near future. So my question is can I buy replacement springs or should I try and find a set at the junk yard? Also are the springs interchangable from side to side. Thanks in advance...

Do any of you guys know of a good shop in the Richmont Va. area? My 04 is going to need an alignment after I put my lift on. Thanks,Todd

Hey guys, my question is if I want to get a 6" Skyjacker Lift for my 1994 Explorer can I get the lift for the Ranger (#236rhksa) the one with longer Radius arms and new rear leaf springs? I know I need to remount the perches but if I use the new leafs will I have more than 6" of lift in the...

Hey guys, my question is if I want to get a 6" Skyjacker Lift for my 1994 Explorer can I get the lift for the Ranger (#236rhksa) the one with longer Radius arms and new rear leaf springs? I know I need to remount the perches but if I use the new leafs will I have more than 6" of lift? Also is...

Trany is an auto, don't know what gears it has. So what your saying is the lift for the Ranger will work on an Explorer? What year in the Ranger would I need to get? If I put a 8-9k Lb. winch and a new bumper up front is this this going to sag enough to too need need coil spacers? Bear with on...

Hey Guy's, This site is awsome!! Been looking at a lot of the posts and trying to decide what I want to do to my Explorer I'm getting for FREE from my Father-in-law!! The Specs are 1994 Explorer Limited with 82k miles everything is stock. This Truck will be my Hunting/Play thing. I'm...