intake gasket | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

intake gasket

  1. R

    Repair manual

    Hello everyone. Brand new to the forum here. Gotta say you have some really good information on here. Great job!!! I was wondering if anyone knew repair manual in PDF format. I have searched on several sites and I'm not been able to find one. I'm having a pretty bad misfire on my Explorer... got...
  2. K

    Intake leak please help running out of options

    Hi i have a intake leak, well thats what the code reader says, i made a home made smoke machine and only notice smoke from the break booster hose and out of the back of the iac sensor where the lil filter on the back is. I change the hose to the break booster, and cleaned the iac sense i have...
  3. J

    4.6 Upper Intake Gasket Part Number

    Hello Everyone, I'm in the process of rebuilding my 2006 4.6 I have taken the intake manifold apart to clean out all the oil and carbon. I separated the plastic intake from the charge motion control plates and wanted to replace all the gaskets. My question is does anyone know the part number...
  4. J

    1997 4wd OHVFI 4.0 Explorer Overheating

    Ok, first time Ford owner. Replaced the water pump because it was losing coolant to discover that the freeze plug in the driver's side head had a tiny, oval shaped hole in it and had to be replaced. Replaced that to find that it is overheating with no loss in power leading me away from the...
  5. E

    03 Explorer 4.6L 2V Vin W (Romeo) Timing Chain and Parts...

    I just bought a used 2003 Ford explorer w/ a 4.6L SOHC 2V - Vin Number W (Romeo MI. Plant) I Have to replace Timing Chain, guides, Tensioners. Also, need the Cam holding tools, Camshaft positioning adaptor, Crankshaft positioning tool, I think. I Looked all over Amazon for these Parts and...
  6. O

    How to: R+R lower intake

    This is a writeup on replacing the intake gaskets, injector O-rings, fuel pressure regulator, valve cover gaskets and plugs on a 91-94 4.0 v6. Later models would not be much different. Im not going into great detail but covering the basics so you can tackle this yourself. I recommend using the...
  7. K

    Help Misfire

    i had replaced the intake gaskets upper and lower a little over a month ago to fix a rough idle. it worked for a while but now i am getting a misfire my cel is blinking and my car has a major loss in power and the dash flickers on and off radio restarts. i am receiving two codes at first i was...
  8. A

    1996 OHV 4.0 Explorer Head/Head Gasket Replacement Question(s)

    My head gaskets failed on my 1996 OHV 4.0 (big white smoke cloud from the exhaust 2-3 miles from my driveway, and there was the obvious milkshake on the oil cap). I got her home, shut her down, and ordered a new water pump, t-stat and complete gasket set from Rock Auto. I had been losing...
  9. B

    1995 Ranger 4.0L Head or Intake Gasket?

    Hi everyone, I'm trying to figure how to get my ranger running at its best again. I'm no expert or mechanic, but plan on doing the work myself. Problem: Running, but poorly, lower than normal MPG's, not much power, been like this for a while. It also loses a lot of coolant, but there are no...
  10. S

    How do I replace my intake gaskets on a 1991 Ford Explorer with a 4.0L V6?

    My intake gasket needs to be replaced and i am a new mommy with NO CLUE how to do what i need to...i am looking for a repair manual but i can't find one that wont charge me. IF anyone has any help or a link to a site that i can find a repair manual for free PLEASE e-mail me ASAP cause my truck...
  11. G

    Lower intake/head gasket help

    1998 Ford Ranger 4.0 XLT 4X4 186,000 miles. I have a big leak going on and it appeared to be coming from in between the (Driver's side) head and the lower intake. Being my first time really tearing into an engine this deep, do any of you have any suggestions or tips for me? If anyone has...
Back
Top