acowx
Member
- Joined
- September 9, 2006
- Messages
- 19
- Reaction score
- 0
- City, State
- PA
- Year, Model & Trim Level
- 97 XLT Ranger
Guys,
I'm at my wits end trying to work out the correct plug wire format on the coil packs of an 8 wire 2.3.
My Chilton has the wire layout as shown below
The front coil pack serves the inlet side plugs and the back coil pack serves the exhaust side plugs.
HOWEVER, Ford and Haynes have the plug wires 2 and 3 reversed on each coil pack ! I just need to know which is correct.
Can some of you guys check which way your plugs are connected and also which bank of plugs are served by each coil pack
Thanks !
I'm at my wits end trying to work out the correct plug wire format on the coil packs of an 8 wire 2.3.
My Chilton has the wire layout as shown below
The front coil pack serves the inlet side plugs and the back coil pack serves the exhaust side plugs.
HOWEVER, Ford and Haynes have the plug wires 2 and 3 reversed on each coil pack ! I just need to know which is correct.
Can some of you guys check which way your plugs are connected and also which bank of plugs are served by each coil pack
Thanks !