Intenseman
Member
- Joined
- April 29, 2001
- Messages
- 22
- Reaction score
- 0
- City, State
- Denver, CO
- Year, Model & Trim Level
- 2002 Explorer
Recently got the tranny rebuilt around 180k. It's back at the tranny shop and their suggesting the tranny needs to be reflashed. That's not something they do there. They're suggesting that the TCC is the issue.
So before I take it to the stealership, I'm wondering if any of you have had a similar issue or some advice for me. The tranny slips going into OD after a load. An example would be I'm accelerating up an onramp. When I get up to speed and I pull back on the accelerator the rpms go up and then it goes into gear. That's the worst one. It also does it in traffic to a lesser extent.
Any thoughts?
Thank you in advance.
Michael
So before I take it to the stealership, I'm wondering if any of you have had a similar issue or some advice for me. The tranny slips going into OD after a load. An example would be I'm accelerating up an onramp. When I get up to speed and I pull back on the accelerator the rpms go up and then it goes into gear. That's the worst one. It also does it in traffic to a lesser extent.
Any thoughts?
Thank you in advance.
Michael