ryan356
New Member
- Joined
- January 1, 2011
- Messages
- 4
- Reaction score
- 0
- City, State
- Watertown
- Year, Model & Trim Level
- 2004 XLT, 4.0
New Official Member here. Been browsing forever and finally created an account. Site is great but cant seem to find what I need. I have been trying to get rid of a pesky ABS light to no avail... Does have the intermittent cruise control issue... Also, it does not seem to like to go into 4lo, but other 4x4 buttons seem to work. Other vehicle history - past ABS and 4x4 light issue was fixed with new ABS sensor in front, plus new main computer which controls 4x4 as well...
Sick of paying dealer to read codes which half the time doesn't help anyhow. I first had them check the ABS codes and they indicated that due to B2900 code and pinpoint check that the ABS module was bad. I ordered a used on online and installed. Light still on. I purchased AutoEnginuity with Ford package to help (BTW-I am in Northern NY, Watertown area if anyone wants to check their codes...). This is what I have for codes:
Make: Ford Model: Explorer Year: 2004
VIN:
MIL: Off
Diagnostic Trouble Codes
Generic Powertrain
No diagnostic codes retrieved
Airbag
B1342 ECU Is Faulted
B1921 Air Bag Diagnostic Monitor Ground Circuit Open
Park Aid
No response from module
Enhanced Powertrain CAN
P1000 OBD Systems Readiness Test Not Complete
Electonic Automatic Temperature Control CAN
No diagnostic codes retrieved
Tire Pressure Monitor CAN
No diagnostic codes retrieved
4x4 Control CAN
B1317 Battery Voltage High
B1318 Battery Voltage Low
U1900 CAN Communication Bus Fault - Receive Error
Instrument Cluster CAN
U1900 CAN Communication Bus Fault - Receive Error
B2659 Courtesy Switch Fault
B1352 Ignition Key-In Circuit Failure
B1318 Battery Voltage Low
U2013 Compass Module is not Responding
Anti-Lock Brake/Traction Control CAN
B2900 VIN Mismatch
U1900 CAN Communication Bus Fault - Receive Error
C1236 Speed Wheel LR Input Signal Missing
C1235 Speed Wheel RR Input Signal Missing
The main thing that grabs my attention is the same B2900 code. I wonder if I wasted time and money to replace the ABS module. At first I thought the replacement module wasn't the right one as the serial/part numbers on them weren't exactly the same, but now not so sure that is the issue... Thinking about buying the $20 cruis control part that goes on the master cylinder because of cruise issue. Any help would be appreciated. Is there other pinpoints I can check? Thanks in advance.
Sick of paying dealer to read codes which half the time doesn't help anyhow. I first had them check the ABS codes and they indicated that due to B2900 code and pinpoint check that the ABS module was bad. I ordered a used on online and installed. Light still on. I purchased AutoEnginuity with Ford package to help (BTW-I am in Northern NY, Watertown area if anyone wants to check their codes...). This is what I have for codes:
Make: Ford Model: Explorer Year: 2004
VIN:
MIL: Off
Diagnostic Trouble Codes
Generic Powertrain
No diagnostic codes retrieved
Airbag
B1342 ECU Is Faulted
B1921 Air Bag Diagnostic Monitor Ground Circuit Open
Park Aid
No response from module
Enhanced Powertrain CAN
P1000 OBD Systems Readiness Test Not Complete
Electonic Automatic Temperature Control CAN
No diagnostic codes retrieved
Tire Pressure Monitor CAN
No diagnostic codes retrieved
4x4 Control CAN
B1317 Battery Voltage High
B1318 Battery Voltage Low
U1900 CAN Communication Bus Fault - Receive Error
Instrument Cluster CAN
U1900 CAN Communication Bus Fault - Receive Error
B2659 Courtesy Switch Fault
B1352 Ignition Key-In Circuit Failure
B1318 Battery Voltage Low
U2013 Compass Module is not Responding
Anti-Lock Brake/Traction Control CAN
B2900 VIN Mismatch
U1900 CAN Communication Bus Fault - Receive Error
C1236 Speed Wheel LR Input Signal Missing
C1235 Speed Wheel RR Input Signal Missing
The main thing that grabs my attention is the same B2900 code. I wonder if I wasted time and money to replace the ABS module. At first I thought the replacement module wasn't the right one as the serial/part numbers on them weren't exactly the same, but now not so sure that is the issue... Thinking about buying the $20 cruis control part that goes on the master cylinder because of cruise issue. Any help would be appreciated. Is there other pinpoints I can check? Thanks in advance.