2007 Explorer Sport Trac 4.0 cold air intakr | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

2007 Explorer Sport Trac 4.0 cold air intakr

MikeDW

New Member
Joined
October 8, 2020
Messages
1
Reaction score
0
City, State
Orange Park
Year, Model & Trim Level
2007 EXPLORER SPORT TRAC
Does anybody make a cold air intake for an 07 sport trac 4.0 or do I get to modify one or do a complete fab job?
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Does anybody make a cold air intake for an 07 sport trac 4.0 or do I get to modify one or do a complete fab job?
Probably a custom fab job.
I did a minor intake mod by removing the baffle behind the grille "nostril" opening and then adding a mesh to catch any large objects. Not sure it helps much but al least it's less restrictive. Maybe it even has a ram air effect.
 






K&N SKU: 57-2564
It's a FIPK for 2004-2005 v8 Explorers and works just fine on the 4.0 V6.

You'll simply move your MAF to the housing attachment on the K&N tube and make a couple little cuts to the heat shield to allow for passage of the A/C lines against the fender wall. Otherwise, it's a direct replacement.

This is not my photo, but belongs to a former member here named Stalker. If you have tin snips and a screw driver, you're set.

IMG_0154.jpg
 












But does it look or sound as good? ;)
 






Beautiful little setup. Aside from needing a small tapping drill bit and 3 sheet metal screws, it's a direct bolt on kit for the 4.0L trucks.

215270485_502881050996436_2937114028416135580_n.jpg


216976425_598995744414393_4726472169053550398_n.jpg


217062068_1006572653474163_5428668567768218099_n.jpg


218379338_654241849305174_8996306952234848904_n.jpg
 






Back
Top