RobJ_0907
New Member
- Joined
- March 2, 2015
- Messages
- 1
- Reaction score
- 0
- City, State
- West Virginia
- Year, Model & Trim Level
- 2016 Interceptor Utility
Hi everyone. Long time Explorer owner, first time "caller"!
Let me preface with, I tried to search this issue, but only found threads for older models.
I have a newer 2015 Interceptor Utility and it with standard cloth seats. I purchased Power/Leather seats from a vendor that come out of a 2013 XLT. The drivers side works fine because the stock seat was power; however the passenger seat wasn't. So when i hooked up the cable there is no power to the motor and the AirBag light comes on. I looked under the hood at the fuse block and there was an empty space for the fuse, however it's not a complete circuit.
So I guess what I'm asking is two things:
1) Can anyone help with a wiring pinout, so i can fuse and run my own power to the seat?;
2) Does anyone know if that will solve the AirBag light issue, or is that something i should have the service center look into?
Both the seats are heated as well, but I'm really not overly concerned about getting that working. I'd just like to be able to adjust the seat. As it sits now, the seat was all the way back, and I haven't even been able to get the rear mounting bolts in to secure it all the way. Not that that would be a safety issue or anything :-0)
Thanks in advance to any and all help.
Rob
Let me preface with, I tried to search this issue, but only found threads for older models.
I have a newer 2015 Interceptor Utility and it with standard cloth seats. I purchased Power/Leather seats from a vendor that come out of a 2013 XLT. The drivers side works fine because the stock seat was power; however the passenger seat wasn't. So when i hooked up the cable there is no power to the motor and the AirBag light comes on. I looked under the hood at the fuse block and there was an empty space for the fuse, however it's not a complete circuit.
So I guess what I'm asking is two things:
1) Can anyone help with a wiring pinout, so i can fuse and run my own power to the seat?;
2) Does anyone know if that will solve the AirBag light issue, or is that something i should have the service center look into?
Both the seats are heated as well, but I'm really not overly concerned about getting that working. I'd just like to be able to adjust the seat. As it sits now, the seat was all the way back, and I haven't even been able to get the rear mounting bolts in to secure it all the way. Not that that would be a safety issue or anything :-0)
Thanks in advance to any and all help.
Rob