Photos 3rd gen pic's

[n.gardner]

Looks amazing ronnin. Good stuff
Posted via Mobile Device

 

[lynchy wa]

Bloody hell mate, that came out sweet as. I love the look of your rig and hope to get mine looking as good one day. She's awesome.

 

[armysoldier30263]

looks awesome man ... cant wait until my spacers come in ... i got 2.25/1.75 but had a problem with brandon shipping them so they should be here by the first of the week and on the weekend on the 12th ... cant wait ... but other than the 4.10s and locker whats next? and fyi guys if you get a set of the pilot off road lights at autozone the hard kc covers will fit on them i used a little velcro to ensure they wouldnt fall off ... for the guys on a budget

 

[Ronin8002]

Hey thanks all for the comments. Armysoldier after the gears and locker I will get back to making brackets to get my tow hooks to work with the brush guard and some more offroad lights. I will also work on a limiting strap setup for my suspension. After that I'll probably look into getting a fuel tank skidplate, some rocksliders, and an onboard air setup.

 

[armysoldier30263]

are you going to do the rocksliders they found on here the other day? and what lights are you going to do? light up the world like miller? lol im going to do the yota rocksliders after i save up some more money so maybe early spring???

 

[xplorerguru]

Hey Xplorerguru, think you could send him one more asking about the steering. I'm sure its a gear box but dont know what it would be from.

I will!

 

[MCD04EB]

looks great Ronin! that looks like the perfect height. What brand is your grille guard and where did you get it? i am lookin into gettin one like yours, it looks great!

 

[Ronin8002]

are you going to do the rocksliders they found on here the other day? and what lights are you going to do? light up the world like miller? lol im going to do the yota rocksliders after i save up some more money so maybe early spring???

Yeah I was thinking of the rocksliders that were posted in the thread. Got plenty of other things to get to before I tackle those though.

For the lights there are some square 100W ones I found on summit racing that are the same dimensions as what I have now. I was going to put 3 or 4 of them in a row on my brush guard. Should be a lot brighter seeing as the ones I have now are only 55W each! I'll hang onto the ones I have from the front and figure out where to put those...maybe use them as backup lights?

 

[Twaugh1977326]

 

[lynchy wa]

Real nice and clean looking mounty you have there mate!

 

[MCD04EB]

mounty looks great! any plans for it??

 

[MillerTimeX17]

Ronin8002, Lookin good bro!!!! Those 265s look PERFECT

 

[Wookie]

Finally got a decent day, so I was able to install the lower billet grille and give her a nice bath and detailing. Going to paint the headlights black this weekend, also ordered some corners that will match (hopefully those come in the mail by the weekend). Also ordered some rain guards for the windows, and some yellow tint for the fog lights. Going to be a fun weekend.

 

[MCD04EB]

those billet grilles look awesome! your headlights are gonna make it look a lot better too, i have yet to do mine but im going to once it gets warmer

 

[Wookie]

those billet grilles look awesome! your headlights are gonna make it look a lot better too, i have yet to do mine but im going to once it gets warmer

Yeah I wasn't planning on doing them quite yet, but it's so nice here this week, I just want to get outside and work on it.

 

[MCD04EB]

Yeah I wasn't planning on doing them quite yet, but it's so nice here this week, I just want to get outside and work on it.

yeah this weekend was really nice and i took off my running boards and was trying to make up other reasons to be workin on my ex. haha its addicting!

 

[Jwigs7]

Where did you get the body lift from? I have looked everywhere and cant seem to find any real body lift kits for my 04 Lim..

 

[Ronin8002]

Where did you get the body lift from? I have looked everywhere and cant seem to find any real body lift kits for my 04 Lim..

Body lift that everyone uses is PA 883. There is a writeup on how to make it work at the top of the forum.

I just took the blocks from that kit and cut them down to 1.5" and used shorter bolts.

If you go the 1.5" route here is a link where you can buy 5, 3" blocks and cut them in half (you need 10 total blocks).


Then go to bolt depot and order bolts in the following sizes:

(2) 12mm x 140mm bolts, (2) 12mm x 130mm bolts, and (6) 12mm x 150mm bolts.

It's better if you get bolts that are threaded for the entire length of the bolt....saves you work for the front two pucks (no grinding!) and having to add tons of washers to the rear seat body mount bolts to make them tighten all the way.

for the 1.5" body lift no bumper brackets or steering shaft extension are needed.

 

[Twaugh1977326]

Thank you diego is real clean in and out......i love it would just love to get the title for it......

 

[MCD04EB]

Hey fedy, where did you get that fx4 sticker? It looks awesome!