MAS Tequila
Elite Explorer
- Joined
- October 6, 2013
- Messages
- 658
- Reaction score
- 118
- City, State
- Boca Raton FL
- Year, Model & Trim Level
- 2015 PIU
I had a vibration and finally tracked it down to the front drive shaft.
After pulling the front DS everything was as smooth as silk.
I changed both u-joints and reinstalled the DS today.
The vibration did not change.
Do I have a bad DS?
I read where the front DS used with the 4406 had a relatively high failure rate. Not when put in Gen2's, but in their stock locations.
There's a lot of head scratching going on here.
MT
After pulling the front DS everything was as smooth as silk.
I changed both u-joints and reinstalled the DS today.
The vibration did not change.
Do I have a bad DS?
I read where the front DS used with the 4406 had a relatively high failure rate. Not when put in Gen2's, but in their stock locations.
There's a lot of head scratching going on here.
MT