softnfat98
New Member
- Joined
- October 7, 2008
- Messages
- 6
- Reaction score
- 0
- City, State
- Mississippi
- Year, Model & Trim Level
- 98 Ranger 4x4
98 ranger 4wd 5r55e trannie. Did the valve body TSB's Seperator plate and blow off valve. When I removed the valve body I had gasket missing at the Low/reverse servo, so I thought I had this problem whipped. No go still no reverse and no engine braking in 1st. Other than those issues this tranny runs great! Could the low/reverse servo piston seal cause this? Should I have installed the superior shift kit? Thanks for any help!!!