8.8 swap from 2nd gen to first gen 2wd

[Insanejuggalo]

I was wondering what is needed to swap over my rear axle to the 2nd gen rear with disk brakes and limited slip

 

[Explorin'VA]

This page has everything you need to know.

http://www.explorer4x4.com/discrear.html

It's a direct bolt on swap. There are just minor differences between the disk and drum brake lines.

Once you bolt the new axle in place, you will run a right side brake hose to each caliper, then mount the brackets on the hoses to your spring perches, then run a hard line from the caliper hoses to each side of your junction block at the top of the differential, then bleed and refill the system. You may also need a different length parking brake intermediate cable. All the parts numbers you need are listed in the link.