Watchman
Well-Known Member
- Joined
- November 11, 2013
- Messages
- 219
- Reaction score
- 19
- City, State
- Virginia
- Year, Model & Trim Level
- 1993 Explorer Sport-4WD
Hello - The ABS light stays on. IT has been like this for about a year. Earlier this summer I replaced front calipers and pads. I also replaced the rear abs sensor in the rear differential. Abs light still on. So, I used the useful thread here on this forum (How to: Pull trouble codes on 4WABS, very simple)
to check ABS codes and this is what I got:
31 - Front Left Sensor Electrical Failure
32 - Front Right Sensor Electrical Failure
33 - Rear Axle Sensor Electrical Failure
35 - Front Left Sensor Erratic Output
41 - Front Left Sensor Mismatched Output
42 - Front Right Sensor Mismatched Output
67 - Pump Motor
75 - Front Left Sensor Erratic Output
I ohm'd the front sensors and they are in the 1500 ohm range. Any ideas where to check next ? Unfortunately the pics are gone from the useful thread for testing abs.
Thanks for your help.
to check ABS codes and this is what I got:
31 - Front Left Sensor Electrical Failure
32 - Front Right Sensor Electrical Failure
33 - Rear Axle Sensor Electrical Failure
35 - Front Left Sensor Erratic Output
41 - Front Left Sensor Mismatched Output
42 - Front Right Sensor Mismatched Output
67 - Pump Motor
75 - Front Left Sensor Erratic Output
I ohm'd the front sensors and they are in the 1500 ohm range. Any ideas where to check next ? Unfortunately the pics are gone from the useful thread for testing abs.
Thanks for your help.