sunrse777
Member
- Joined
- February 13, 2007
- Messages
- 47
- Reaction score
- 0
- City, State
- New York
- Year, Model & Trim Level
- '91 XLT Supercab 4X4
Couple of questions that I am hoping someone can help me on ... I have not done the brake lines on this trucj before and want to be sure I get the right parts, etc....
1. Are rear lines 3/16 inch ?
2. What fittings are used at the wheel cylinder and splitter block? Metric ?
3. The fittings on the truck now are real rusty... what is the best way to
get them off ?? Cut the line, PB Blast them and use a use a vise grip on
them ??
4. If I buy the pre-made straight lines at the parts store,, what length and
with what fittings on them should I get to go from the wheel cylinder to
the splitter block on the rear axle ?
Thanks ......
1. Are rear lines 3/16 inch ?
2. What fittings are used at the wheel cylinder and splitter block? Metric ?
3. The fittings on the truck now are real rusty... what is the best way to
get them off ?? Cut the line, PB Blast them and use a use a vise grip on
them ??
4. If I buy the pre-made straight lines at the parts store,, what length and
with what fittings on them should I get to go from the wheel cylinder to
the splitter block on the rear axle ?
Thanks ......
