RustyMacintosh
Well-Known Member
- Joined
- August 5, 2018
- Messages
- 190
- Reaction score
- 50
- City, State
- Monterey
- Year, Model & Trim Level
- 94 XLT 4x4 Exploder
PO did the front end on this XLT. I see red bushing on the radius arm,. but shinny spots on the metal, which indicates to me the arm is moving.
I was told, I can use a come-along to pull the front axle forward enough to slip in new bushings in front, then let it come back where I would put a bushing on the back, then hit that 28mm nut with an impact wrench.
Doable?
I was told, I can use a come-along to pull the front axle forward enough to slip in new bushings in front, then let it come back where I would put a bushing on the back, then hit that 28mm nut with an impact wrench.
Doable?