coleman007
New Member
- Joined
- September 21, 2009
- Messages
- 3
- Reaction score
- 0
- City, State
- Terre Haute, IN
- Year, Model & Trim Level
- 97 Mercury Mountaineer
Dropped the Transmission pan to change the epc solenoid and found that one of the wires going to it was bare and now broke, not sure if it was already or broke while trying to see where it goes. Is the wiring harness easy to change and how? Also found a part in the pan that has a round top with an rubber washer around it, the center of it dips in and the other end has a shaft which looks like fluid would shoot through. It's about 2 and 1/2 inches long. Thanks for the any help.
