98 Explorer XLT DTC U1147 P1206 | Ford Explorer Forums

  • Register Today It's free!

98 Explorer XLT DTC U1147 P1206

ChirstIsKing

New Member
Joined
December 14, 2023
Messages
2
Reaction score
0
City, State
Coolidge, Ga
Year, Model & Trim Level
1998 Explorer XLT
Hey y'all! My 98 explorer XLT is having an issue where it will not turn over. When the ignition is on, the theft light will show up for about 2-3 seconds and then turn off, but it will not turn over when I turn the key. My scan tool is giving me codes p1000 and p1206 in the PCM, and code u1147 in the PATS. It doesn't do this the majority of the time, and usually it will start right up. The last time this happened I disconnected the battery for around 8ish hours and then reconnected it, and I was able to start the car, but I'd rather not have to do that every time this happens. If anyone of y'all have had this issue and fix it, can you please tell me what you did? Any help would be much appreciated!

Here's what the codes mean:
p1000 OBD readiness test not complete
p1206 Engine Disable by PATS
u1174 Communications issue, SCP (J1850), between PCM and PATS control (PATS/ICM/ VIC/HEC/SCIL).
 






You might try this

 






You might try this

Thanks for the help! I went and checked the PCM connector and everything seemed fine. I couldn't find where that other one was. I went on Youtube and looked up the issues, and someone said something about the gear shifter thing not being in park all the way. I moved the shifter around and it started right up. So that was the issue all along.
 






Back
Top