99 Expedition XLT 4x4 build thread

[Bruces expo]

Sweet , Starting a Sas thread Soon then ! , I Found out I'm missing my Drive shaft and the 4x4 switch , Looks Like I'll Be Going To Pull a Part Soon , Also i have to get a Pass side mirror and Driver side Tail light Lens , Did Your Stock Rear Shocks Have Allot of Up and Down Play , I Crawled under my exp and pushed up with my legs on the bottom of truck to find a Noise every time I Hit a bump , My Shock Bushings on the Bottom Are Wore Out , Were Yours ?

 

[SkyJumper]

No my shocks are fine even before I swapped out for the 4" lift Rancho's. You may have a worn spring bushing or something of that nature. A good visual will tell alot.

But a SAS thread will start as soon as I get somewhere around 90-95% of the parts needed.

I have a extra set of great shape tail lights if you need em.

 

[Bruces expo]

Thanks , Well i Only Need the Driver Side As the Passenger Looks original And Good shape

 

[Kazer]

hows the SAS parts gathering going? looking forward to an SAS thread because this would look so nice with 35s