stclist112
Brooklynbay, I replaced the governor and the weight with the steel one.
I drove it last night and today it shifted fine, I don't want to talk to soon,
but thanks for your help!!
The weight did spin freely, however the middle pin that the spring sits on
seemed to be getting stuck a little not allowing the weight to sit on the shaft, that must have been it, and it had a few little grooves in it!
I have two questions:
1- I noticed the shaft that the governor bolts tomoves a little, if I grab the shaft and wiggle it , it will have some play, Is this normal?
2- when is a good shift point, I think I may need to adjust the modulator.
it will shift into 2nd at 7 mph and into 3rd at 27mph. is this ok?