Nasty Nuggets
New Member
- Joined
- July 22, 2013
- Messages
- 6
- Reaction score
- 0
- City, State
- kentucky
- Year, Model & Trim Level
- 2007 explorer xlt 4.0
i know you have bled the brakes several times but try this. buy a bottle or 2 of brake fluid. get u a turkey baster and suck some fluid out of the out but not enough to dry it out. go to the furthest capiler away from the master, which should be back right. have someone pump the brakes a couple times, hold them down on the third time, then crack the bleeder and let it drain for a sec then tighten it. have ur assistant push in the brake to the floor, then let their foot slide off the pedal instead of easing it back. this will force the air out if there is any. keep adding fluid to ur master cylinder and dont let it dry out. do each caliper like this until u get clean fluid from each. ur problem is most likely air in ur lines.