98EdBomber
Well-Known Member
- Joined
- January 5, 2011
- Messages
- 204
- Reaction score
- 5
- City, State
- Las Vegas, NV
- Year, Model & Trim Level
- 98 E.Bauer 4.0(RWD)
I recently purchased new tires/balanced. Had the guy put it on the rack to check the alignment and everything is good. Camber is only .1 degree off. Caster is all good. The left side Toe is .25 different than the right. Guy said He could turn the tie rod maybe a quarter of a turn to even it up but it wouldnt make a difference with that small amount. So I left with my vehicle still pulling to the right.
My question is what could I look at myself to find a reason for the pulling. Frame is not bent. Steering wheel is straight but this POS just wants to go right. Did the upper and lower ball joints last summer and checked them again and no play in the wheel. Tie rods look great too. I also dont have any play in the steering wheel either. My shocks are a little warn out and even with the new tires im getting a little fluttering on the highway so Im putting new shocks on this week. Just to name a few things.
So what could I possibly do/check myself to fix the pulling to the right? Thanks.
My question is what could I look at myself to find a reason for the pulling. Frame is not bent. Steering wheel is straight but this POS just wants to go right. Did the upper and lower ball joints last summer and checked them again and no play in the wheel. Tie rods look great too. I also dont have any play in the steering wheel either. My shocks are a little warn out and even with the new tires im getting a little fluttering on the highway so Im putting new shocks on this week. Just to name a few things.
So what could I possibly do/check myself to fix the pulling to the right? Thanks.