ARC sensor and lift

[Langley91]

Im looking at either puting some warrior shackles on or getting some old man Emu leaf springs, but in order to maintain the ARC system, i assume the sensor position needs to be modified.

So, do i need a plate or something to lift it, and if i do what would the thickness be required? If im doing a 40- 50mm lift would a plate of the same thickness be needed or is there a ratio that anyone is aware of.

Many thanks

sam

 

[Purch1977]

Was told its trial and error! I built some shackles with a 2 inch lift and used a nylon wedge of aprox 1.5 inch this seemed to work for me!