Rhett:
Here is my current hybrid setup:
hahaha! Funny how I piecedit together....
Front:
1992 Dana 35 TTB
4.10
ARB
James Duff (JD) axle pivot bushings
JD 3" axle pivot drop brackets
JD 3" VR lift coils
Ford F-150 spring seats
Skyjacker extended radius arms
Skyjacker radius arm mounts and transmission X member
Energy urethane bushings in sway bar
Rancho 9000 RX 9179 front shocks
custom quick disconnnects
Rear:
1997 Ford 8.8 4.10 L/S
Skyjacker 4" leaf springs
spring over coversion on axle
stock shackles (BII, new from Ford)
Energy urethane in sway bar
Rancho 9112 RSX rear shocks
on BII style shock mounts (welded to 8.8)
Quick disco's
It rides like a dream!
all brakes are new, spindles, wheel bearings, steering, gears, u joints, been replaced.
I installed the rear leafs and new shocks last weekend.
tomorrow she goes in for a slight alignment adjustment
Best it has ever driven, I have the ranchos set on 5 for the street, havent messed around with them too much yet.
Next on the horizon are 3" bent beams, 6-8" lift coils (if I go 8" I will move bucket up), F-250 shock towers (need them now for the shocks I just installed), limiting straps, and coil retainers..........