turboexplorer
Elite Explorer
- Joined
- August 23, 2008
- Messages
- 1,949
- Reaction score
- 37
- City, State
- Eagle Mountain, UT
- Year, Model & Trim Level
- 98' XLT 5.0L 4X4
- Callsign
- Turbo
The hub should be the bearings just like the front on our second gens. I don't have a third gen but from what I have sean on here. You could take the nut off which holds the CV to the hub. Then the rotor then the e-brake shoes then the brake caliper mount, then should be like three bolts that hold the whole hub on the truck! Anyways anyone chime in if I'm wrong,