Blacked Out Limited (94)

[GetDome]

Hi, eXplorers. im new to explorer forum. i have a 1994 explorer limited. i was wondering what the biggest tires i can fit with a 4in lift are? ive been told only 31s (without rubbing control arms) ive also been told i can fit 33s (also without cutting). Also im looking for a aftermarket intake tube? i think thats the name of it, it already has the cold air intake. i just want to give it more engine dress up. where can i find such thinng?

 

[BigRondo]

Welcome aboard!! :slaute:

I have moved your thread to the Modified 1st Gen Sub Forum for better exposure.

Good luck getting it sorted.

Please keep us posted as feedback helps others reading this post looking for a fix to the same or similar issue!

 

[Anime]

91-94 explorers.
No lift- 31x10.50x15 on 15x8 inch rims
1-2 inch suspension lift- 31x10.50x15 - 32x11.50x15 on 15x8 rims/ may require some extensive fender trimming
2-3 inch suspension lift- 32x11.50x15 on 15x8 or stock rims
3-4 inch suspension lift- 32x11.50x15 - 33x12.50x15 on 15x8 rims/ may require fender trimming
4-6 inch suspension lift- 33x12.50x15 - 35x12.50x15 on 15x8 rims/ may require fender trimming
2 inch body lift- 32x11.50x15 on 15x8 rims/ may require fender trimming
3 inch body lift- 33x12.50x15 on 15x8 rims/ may require fender trimming
2 inch body lift and 1-2 inch suspension lift- 32x11.50x15 - 33x12.50x15 on 15x8 rim/ may require fender trimming
2 inch body lift and 2-3 inch suspension lift- 33x12.50x15 on 15x8 inch rim
2 inch body lift and 4-6 inch suspension lift – 35x12.50x15 – 36x12.50x15 on 15x 8 rim/ may require fender trimming
3 inch body lift and 1-2 inch suspension lift – 32x11.50x15 – 33x12.50x15 on 15x8 rim/ may require fender trimming
3 inch body lift and 2-3 inch Suspension Lift – 33x12.50x15 – 35x12.50x15 on 15x8 rim
3 inch body lift and 4-6 inch Suspension lift – 35x12.50x15 – 36x12.50x15 on 15x8 inch rim
6 inch Suspension Lift - 36x12.50 on 15x7 factory wheels (requires fender trimming, firewall clearancing and rocker panel modification)
6 inch Suspension Lift - 35x14.50 on 15x8 wheels with 4" back spacing (requires fender trimming, firewall clearancing and rocker panel modification)

$140 Intake tube:

http://www.ifab.net/products/93intake/91Ex/


or there's always the custom PVC route for cheap:

 

[GetDome]

http://www.amazon.com/Spectre-Perfo...F8&qid=1403710579&sr=1-1&keywords=intake+tube
would this fit?

 

[Anime]

You can piece together an intake kit from Spectre parts. That particular part might work for the air filter, but you'd need a 90 degree elbow piece to connect it to the throttle body.

I would say you're better off getting the sections of real aluminum tubing off ebay, a 90 degree elbow, a straight long piece, and a 45 degree elbow, and the silicone connectors, rather than the cheap plastic stuff from Spectre. You may even find a straight piece that has a hose connector built into it for the oil filler tube breather hose.