Body Lift and Manual T-case

[Kris Guilbeaux]

Does any one know where I can get an extention for a Manual T-case lever with a 3" body lift.

 

[mrboyle]

I'm not sure if there is any available. It wouldn't be that difficult to fab one up though. You might check with performance accessories and see if they offer anything that will work.

 

[Kris Guilbeaux]

any one else?

 

[Trckmagik]

Just get a bolt from hardware store and tack weld it. You will never see it. This is what I planned on doing.

 

[410Fortune]

Brett'sgot a 91 4 door X with a 3"body lift and a manual t case in it (factory! crazy hua! 5 speed) that he is parting out, oh and the T case is already sold. However when we were trying to dismantle the shift linkage/boot/assembly we noticed that a 3" extension was welded onto both shifter's. Looks like the only option is to weld something up.....I really doubt anybody makes an extension since the manual t cases are so rare..........

 

[Trckmagik]

Yep. You can check in the ranger kit for PA. It may have it since they were more common in the ranger.

 

[Kris Guilbeaux]

I checked with the Ranger boards as well and I have found nothing about an extention for the manual T-case. I might cut down the Body lift a bit and Trim more out of the fenders. As of Right now I have no rub at all with the 36"s but still plan ot trim anyway.

 

[Trckmagik]

Where are the pics of the 36's?

 

[Kris Guilbeaux]