cam chain / tensioner issues

[Troy Lane]

Dreaded Cam-chain rattle just started, never been an issue on start up,
just happened all of a sudden, So would suggest that guides have failed not tensioner issues?
car still starts and idles but noisy! Front (left) cassette has worn through cam cover
advise please
Troy

 

[no1plantman]

I am doing all chains right now. There is very detailed info here. Step by step with pics.
http://www.explorerforum.com/forums/showthread.php?p=2509638

 

[no1plantman]

also check out member StreetRod2000 helpful threads.
http://www.explorerforum.com/forums/showthread.php?p=2349038

 

[Troy Lane]

Cheers No.1
Very grateful for all help.
Just finding my way around the forum at moment.
I was trained to be a mechanic 30 years ago but only do as a hobby these days..
Just glad there is help around that does go with my thinking still

 

[2000StreetRod]

check the rear cassette

The left (front) cassette can be replaced with the engine in the vehicle. To replace the right (rear) cassette the engine or transmission must be pulled. I suggest you inspect the rear cassette before working on the front cassette to determine if the engine should be pulled.

 

[Troy Lane]

Many thanks 2000,
going to look at front first though, as left cassette obviously has a problem.....
(Chain has worn through cam cover!)
Had absolutely no noises....Chains/tensioners....then bam!
Has only done 1 mile since to get back to base then turned off!
Still starts first pull...So just hoping!