9794shmazdaranger
Member
- Joined
- December 2, 2020
- Messages
- 14
- Reaction score
- 2
- City, State
- Grass Valley, CA
- Year, Model & Trim Level
- 1994 Mazda B4000
Can anyone tell me how many times the camshaft syncroniser rotates for every revolution of crankshaft harmonic balancer? If I'm not mistaken is it 2 times? This would be on a 4.0 V6 OHV (NON-SOHC) I feel stupid. I rebuilt this 97 ranger engine and the timing chain was set at 6 and 12 respectively. But when I put the harmonic balancer on I didn't rotate it. So when I'm at TDC I'm 180 out but there is a mark on the harmonic balancer that is 180 out like someone had done this before.
So when I stab the camshaft syncroniser in should I just put it at 180 out so I don't have to rip the timing cover back off or have to pull the harmonic balancer? Any help would be greatly appreciated and much obliged,. I've been fighting this thing for awhile and just wanna get it finished. Thank you in advance for any help.
So when I stab the camshaft syncroniser in should I just put it at 180 out so I don't have to rip the timing cover back off or have to pull the harmonic balancer? Any help would be greatly appreciated and much obliged,. I've been fighting this thing for awhile and just wanna get it finished. Thank you in advance for any help.