Damn Manual Tranny

[93RiceKiller]

Ok so heres the deal. When i have her runnin, and out of gear, I let the clutch out and the tranny makes a sort of whirling sound, when i push the clutch back in you can hear it slow down and then go away.

Also when I'm driving down the freeway and really get on it, the tranny sounds like its grinding.

The tranny fluid is full and has always been full.

What the hell is wrong with her?

 

[MrShorty]

My '87 did the same thing on a bad throwout bearing.

 

[Doug]

Sounds like the throw out or pilot bearing. It might be time for a new clutch, slave cylinder, pilot bearing and throw out bearing.

 

[93RiceKiller]

ok now about this gay radio

I want to take the piece of **** tape deck out of it, but there are these non-hetero holes on the side on the side of the deck and i dont know what tool to use to take it out. Do i have to go buy some special tool, or can i just jam the **** out of it with a few screw drivers?


And another thing, the little decal thing on my shift know, the one that has the gear layout, it spins artound when i drive. Now does it come broken stock, or is it an option?

 

[Doug]

the radio is real easy to get out bend a coat hanger and stick it in the holes to get it out. As for the shift pattern dial spinning around both my explorer's and my bronco II. If that is making you cranky you can pop it out with a screw driver and then glue it back down in place.