Deeper engine noise for V6

[mooshin]

In regards to the Gibson being discussed for the 4.0 V6. Gibson Part #319901, says it's for 06-07 FORD SPORT TRAC 4.6L 2/4WD 4DR.
http://gibson.iwebcat.com/imgVD/GIB/319901-instructions-pdf.pdf

Does this also fit the 2WD V6 as it was mentioned by one other person?

 

[JohnnyO]

The Gibson V6 exhaust has a different part number but I think the only difference is the pipe diameter.

Here is Summit's listing for the V6 exhaust I got. They have a different part number for the V8.

http://www.summitracing.com/parts/GIB-319897/

This is the aluminized steel system. There is a stainless steel system also that costs more.

 

[mooshin]

Good looking out. I hate shinny stuff on my truck. No chrome wheels, and no shinny exhaust if I can help it.

 

[nozzy12]

put a flow master and a exhaust it works i tryed it n its faster

 

[mooshin]

huh?

 

[JohnnyO]

Good looking out. I hate shinny stuff on my truck. No chrome wheels, and no shinny exhaust if I can help it.

I'm old-school, I like shiny.
The Gibson system comes with a bolt-on stainless tip but you don't have to use it. The tailpipe comes out far enough and in fact I cut a few inches off so the tip would fit better. I got the aluminized steel system, washed it with Dawn, roughed it up with some sandpaper, and painted it with silver high-temp paint before I installed it. After 3 years in the salt belt it still looks good.

 

[austin26372]

Want a truck sound? Get one; you're driving a hybrid.

 

[mooshin]

Want a truck sound? Get one; you're driving a hybrid.

He said he wanted a deeper sound from the 4.0 Engine. It has no hybrid engine technology.

 

[austin26372]

He said he wanted a deeper sound from the 4.0 Engine. It has no hybrid engine technology.

Not meaning hybrid engine, but in the sense that the truck itself is a hybrid. SUV + truck = hybrid.

 

[mooshin]

I know. I'm just trying to keep you from being a troll. The proper term used in the industry is cross-over.