Migs7
New Member
- Joined
- June 7, 2013
- Messages
- 1
- Reaction score
- 0
- City, State
- So CALi
- Year, Model & Trim Level
- 1987 Ford
Hello ALL!!
I am doing an EATC retrofit, but I am a bit stuck in a portion of the mod. This question is regarding the wiring of the Blend door Actuator ( BDA ). I'll go ahead and post the Pinouts of the plugs for the EATC Module and the colors of those wires that plug into the BDA. Any help identifying what each wire to the BDA is for would be a great help.
Here is the BDA Plug, I suspect the wiring that I have at the plugs to and from the BDA and the module changed along the way because the brand new BDA is not working...
And the two plugs that connect to the EATC Module
I am doing an EATC retrofit, but I am a bit stuck in a portion of the mod. This question is regarding the wiring of the Blend door Actuator ( BDA ). I'll go ahead and post the Pinouts of the plugs for the EATC Module and the colors of those wires that plug into the BDA. Any help identifying what each wire to the BDA is for would be a great help.
Here is the BDA Plug, I suspect the wiring that I have at the plugs to and from the BDA and the module changed along the way because the brand new BDA is not working...
And the two plugs that connect to the EATC Module
