EvilTheCat
Active Member
- Joined
- December 6, 2011
- Messages
- 88
- Reaction score
- 3
- City, State
- Lincoln NE
- Year, Model & Trim Level
- '97 Explorer
I've finally got an Explorer that I can show you all.
Before: (Very Uneven)
Add some lift springs:
and After:
It's now sitting on 33 inch TrXus MTs.
15x8 Procomp Rock Crawler wheels (backspacing 3.75")
I purchased the 2" lift springs from customsuspenion.com
I made my own shackles that are only about an inch longer than stock so 1/2 inch more lift.
Around 2" of lift on the front from torsion bar adustment (needed longer screws to get it that high).
The only rubbing was on a piece of plastic trim, which easily came off.
I still plan to trim the fender a little, because it is awfully close.
Before: (Very Uneven)
Add some lift springs:
and After:
It's now sitting on 33 inch TrXus MTs.
15x8 Procomp Rock Crawler wheels (backspacing 3.75")
I purchased the 2" lift springs from customsuspenion.com
I made my own shackles that are only about an inch longer than stock so 1/2 inch more lift.
Around 2" of lift on the front from torsion bar adustment (needed longer screws to get it that high).
The only rubbing was on a piece of plastic trim, which easily came off.
I still plan to trim the fender a little, because it is awfully close.