JCStevens85
Member
- Joined
- September 9, 2010
- Messages
- 43
- Reaction score
- 0
- City, State
- Seattle, WA
- Year, Model & Trim Level
- 2009 Eddie Bauer
New grill for my Eddie Bauer, I am very happy with it, looks so much better.
Did you have the EB grill with the open slot on the bottom and the two slot on the outside of the top section?
Not bad, but if your keeping your truck in the long run I'd get the KGS grille
2nd Exterior Modification! H13 HID's what a task to install! Resistors and all. Finally I will be able to see at night!
how many k hids u got
What resistors did you use and did you use for the high and low beams?
I used these 6 OHM resistors for the Hi Beams and the 3 OHM for the Lo Beams as recommended by the vleds tech support. Worked like a charm. I also mounded the resistors to these aluminum plates to help disperse the heat, because these things get HOT! All worked out great though.
http://www.v-leds.com/BlinkerWarning-Fix/Turn-Signal-Fix/6-OHM-50W-2-BULB-LED-p4783296.html
http://www.v-leds.com/BlinkerWarning-Fix/Turn-Signal-Fix/2-LOAD-RESISTOR-MOUNTING-p6841378.html
Thx for responding. One more question. Did you mount the resistors before or after the ballasts?
Thanks for the resistor info, I did the HID install and am wearing out the reset button for the bulb out indicator!