Flex em' if you got Em'

[X24]

Hehe, I'll get some of mine tomorrow.

 

[DesertSpive]

Well here are some new pictures of my truck flexing with the new Deaver springs and the RCD traction bars on. I still have another 2" or so with the bars off. So I should have some super flex pics from T-haven...

--Sean

 

[Jefe]

Originally posted by Maniak
Jefe,
You need something like this on your shackle. Then you won't "dig" into the trail.. you just kinda roll..

Naw. . .I like the sound of metal vs. rock

Besides, thats another inch of departure angle you loose, and I'm pretty sure that wheel wouldn't support the entire weight of my vehicle. . and I know I'd have to trail test it that way at least once

 

[Campo]

This is with the rear sway bar's hook''d up

 

[DocVijay]

I'll get some photos this wwekend witht he front and rear swaybars discoed. It should help, since I was getting some serious tire rub in the upper wheel well in the back on full flexion. I'll post them when I get them.

 

[Maniak]

Originally posted by Jefe

Besides, thats another inch of departure angle you loose, and I'm pretty sure that wheel wouldn't support the entire weight of my vehicle. . and I know I'd have to trail test it that way at least once

I gladly give up the 1" of travel to have the shackle not get me stuck... (I had them get me stuck once.. low traction area and the shackle dug into a rock... I've done the same spot with the wheel and I have enough traction to pull me over with the wheel rolling instead of the shackel digging)..

Our X in wheeling trim is 5000 lbs... Those wheels do hold up the truck.. Granted.. the wheels bend.. but I don't care.. I just use a sledge on them once in a while (they still work fine bent)..

Also, When Yolanda out using the truck around town and someone asks her what that is.. She just says that she ran over a shopping cart... It really confuses people..

~Mark

 

[Doug]

Here's pic of me flexing out my truck after i got the 33s. hopefully ill get some better pics this weekend at Paragon.

 

[kontinu1]

 

[DocVijay]

Well, I just ordered some sway bar quick disconnects from my local shop. Should come in next week and I'll try them out and post some more pics. Should be better witht he bar discoed. Maybe I'll unbolt the front too...

 

[Positive Vibes]

Trying to post a pic???

 

[taxx]

yesterday... this hole is much deeper than the pic makes it look....

 

[taxx]

can't wait to mount that solid axle up front

 

[Positive Vibes]

http://photomail.photoworks.com/scr...Bgt831VF3GSX9ttxtP9./MUighvIixiD56YD5i8hUwk&1

 

[taxx]

Originally posted by Positive Vibes

One more. I like being able to post pics finally. Thanks Splashman!

Now how to I post one on my avitar or what ever it's called?[

gotta be elite to have an avatar

 

[kontinu1]

 

[Robb]

Originally posted by taxxman2k
gotta be elite to have an avatar

Postitive Vibes is Elite.

Just send whatever pic you want to use to Rick, he will put it on for ya.

Robb

 

[Positive Vibes]

http://photomail.photoworks.com/scr...xRXYeGTQOJRIpz8qjeqoM4sCM1WJryDbO/czbt0hfoB&1

morrisey0, thanks for the answer!

 

[taxx]

Originally posted by morrisey0
Postitive Vibes is Elite.

Just send whatever pic you want to use to Rick, he will put it on for ya.

Robb

see I talk before I think

 

[Crankcase]

Here are some new urban flex shots....This is about the max I have ever had...the gap below the drivers door was high enough I had to jump back in....

With sways in too...

 

[Crankcase]

The stuffing....I notice pictures don't show height very well...