Fuses blown on amp

[alphabets13]

i have 2 20a fuses on my mtx amp running my sub, and i noticed that the sub was not on, and netiher was the light on my amp. i checked the fuses on the amp, and both were blown. i picked up some fuses, replaced both of them, turned on the system, and the light on the amp went on for about 2 seconds, then shut off. i checked the fuses again, and they are fine. but still no amp light or obviously sub either. what can be wrong with the amp?

 

[Turdle]

disconnect the sub and then switch on. Does it stay powered on then ?

 

[alphabets13]

disconnect the sub and then switch on. Does it stay powered on then ?

just tried it, no go. i disconnected the sub, hoping to see the amp light turn on, but nothing.

 

[Turdle]

do you have a meter?

 

[alphabets13]

do you have a meter?

not at home. at work i do. i'll have to check tomorrow.

 

[Turdle]

Good luck

Make sure to check the resistance of the sub before you connect it to a new amp

 

[alphabets13]

Good luck

Make sure to check the resistance of the sub before you connect it to a new amp

will do. thanks.