headlight adjusting screws where?

[ksaldibar]

i just got my truck back from the shop and the drivers side head lights needs to be adjusted. the haynes manual says there are two adjusting scres per light. i only see the one by the fender to control up and down movement. where is the one for left and right? its a '94. thanks a bunch

-ken

 

[jimbo74]

it is inside the assembly... meaning that the light will need to be removed then adjusted then test fitted then reinstalled

 

[ksaldibar]

r u sure, i'm looking at my haynes manual and the pic ( a newer model, but it didn't say there was a difference between years) shows one adjuster by the fender, and the other down and towards the centerline of the truck. whats going on here. thanks.

-ken

 

[jimbo74]

Originally posted by ksaldibar
r u sure -ken

No, I am not sure... but i think it is.......read disclaimer below

 

[Hartman]

The screw for adjusting the left and right movement is on the opposite side of the fender. If you look on the engine side of the assembly, you'll see a hole. In the middle of that hole about halfway down is a screw sticking out of the side. That's the second headlight screw.