gski
New Member
- Joined
- July 4, 2010
- Messages
- 1
- Reaction score
- 0
- City, State
- elizabeth city, north carolina
- Year, Model & Trim Level
- 98 XLT AWD 5.0
Hello all! First, let me say that this is the first and only forum I've ever joined, so complete NEWBIE as far as posting and all, so if I mess up something, sorry. Anyway, I have been typing questions into google for some time now and ya'lls forum keeps popping up with the answers, so kudos to you all. Now for the first question: My 1998 explorer awd, 5.0, 4 door is giving me a fit. The RH rear window will roll up but not down! Don't people usually have the opposite problem? I have about 8 years mechanic expierence, and am currently in military electronics (about 6 years now). So I have checked or replaced all the usual suspects, such as new window motor and harness, rear window switch, dissassembled and cleaned/inspected master switch, checked grounds and voltages, checked continuity. I have positive 12Vdc when master switch is pressed up, zero when pressed down. I think there is supposed to be negative 12Vdc when switch is basically reversed to spin the motor opposite. Is there a module or a realy or something I am missing here? Again, nice to join everyone.
