Help with 9" disc brake parts location

[Dannyboy]

On my 91 I have a 9" with Wilwood disc brakes. The rotors are held on with 8 allen bolts that remove the outer part of the disc. My rotors are shot and I cannot find the company that made them. Wilwood tells me it's there rotors but not their disc. I'll try to post a pic soon.

Anybody have disc coversions on a 9" and have any clue what I'm running?

thanks

 

[Lilmule]

On my 91 I have a 9" with Wilwood disc brakes. The rotors are held on with 8 allen bolts that remove the outer part of the disc. My rotors are shot and I cannot find the company that made them. Wilwood tells me it's there rotors but not their disc. I'll try to post a pic soon.

Anybody have disc coversions on a 9" and have any clue what I'm running?

thanks

Call Currie, they built it.
Send them a digi pic and they should help you out.
I also like the new shocks and resi's on the back. Maybe they won't heat up so much.

 

[CDW6212R]

If you are talking about a two piece rotor, contact Coleman Machine, they make most all of the rotors for everybody, Wilwood, Brembo, NASCAR etc. If it is a basic rotor disc, they can make it and ship it in a day. I have been eying the Wilwood 8.8 rear kits, they make one with 12" vented rotors. Regards,

 

[Dannyboy]

If you are talking about a two piece rotor, contact Coleman Machine, they make most all of the rotors for everybody, Wilwood, Brembo, NASCAR etc. If it is a basic rotor disc, they can make it and ship it in a day. I have been eying the Wilwood 8.8 rear kits, they make one with 12" vented rotors. Regards,

Don thanks for that tip. I finally got the truck torn down and called these guys. They were ready to help and probably have it in stock.

 

[CDW6212R]

Sounds good, they can make almost anything given the detailed specs for it.

I had thought about asking them for help to make a hub for 2WD Explorers. Some have asked about brakes for the 2WD fronts, but the rotors are far different. For them I wonder if a stock rotor could be machined down to leave a mounting pad for a bolt on rotor like 2-piece units.

Post some pictures when you get to it Danny. Regards,