OfficeVisit
New Member
- Joined
- August 11, 2007
- Messages
- 5
- Reaction score
- 0
- Year, Model & Trim Level
- '02 XLT 4X4
Does the half shaft just "pop" out from the gear box as I am told or is there a trick?
I have the rear torn down so I can replace the wheel bearings but am stuck on removing the half shaft. I do not want to "muscle" it ( I haven't broken anything to this point). Any tricks or just pry it out?
I have ordered the coil springs and struts from Rockauto.com and rear bearing/hub assembly from autopartsdirecttoyou.com. Replaced the front bearings about 3 months ago. Next I guess will be the transmission...
Any advice on uploading pictures?
thanks in advance for any assistance.
I have the rear torn down so I can replace the wheel bearings but am stuck on removing the half shaft. I do not want to "muscle" it ( I haven't broken anything to this point). Any tricks or just pry it out?
I have ordered the coil springs and struts from Rockauto.com and rear bearing/hub assembly from autopartsdirecttoyou.com. Replaced the front bearings about 3 months ago. Next I guess will be the transmission...
Any advice on uploading pictures?
thanks in advance for any assistance.