i need help fast!! please

[fordkid417]

im replacing shakles on my 98 X 4x4. i have the top bolt off but the bottom WILL NOT come out. i have tried everything. PB blaster, wrenching, slamming with a hammer, and im out of ideas. somebody please help

 

[Justawajz]

im replacing shakles on my 98 X 4x4. i have the top bolt off but the bottom WILL NOT come out. i have tried everything. PB blaster, wrenching, slamming with a hammer, and im out of ideas. somebody please help

I had the same prob with mine.. Ended up using a propane torch and a impact gun to get it out.. Don't give up!

 

[GoneExploring]

use some sort of heat and a BFH and a punch I had a problems with mine as well it took a mix of pb blaster turning it to get the blaster in there then beating it back and forth and start over spray the new exposed side with blaster beat it til it wont move no more turn it til it spins kinda free then beat it some more until it wouldnt move any more then repeat again

 

[fordkid417]

thank you guys! im going to try tommorow and hopefully get it out.

 

[96eb96]

air hammer + impact or get someone to do it. Otherwise take ALL your frustration out on that thing!