i need your help guys..

[MikeLitt3810]

ok blinking lights give me migraines.. so here goes.
jumped the test wire to the neg bat terminal

I am including these thumbnails in case someone else need's to know how to pull codes.
Now for the video..

in the video i got half way through it and my head started to explode..

any help would be great. lol i want this baby to get through another year of pa inspection..

 

[MikeLitt3810]

what i am wishing to trouble shoot is the fact my coolant needle hardly moves but yet i'm running hot and rich. and after 15 min of 60* weather I lose almost all power, .. it's a great cold climate ride tho

 

[Maniak]

Here is what I saw..

quick flash (ignore this)

1 1 1 (all good)
1 1 1

separater pulse

157 (Mass Air Flow signal is/was low or grounded)
157

~Mark

 

[Tbars4]

...Quick question...:scratch:...Did you pull the codes right after driving it or had it sat for a while???

...The engine needs to run at operating temp for at least 5 minutes...

EDIT: this should be of some help...
http://www.explorerforum.com/forums/showthread.php?t=119374&highlight=157

 

[MikeLitt3810]

It has sat since November, but I did run it for a good 10 min b4 I pulled the codes.
I came up with 167, and 157, mass air.. it's brand new, and the tps it's factory... but I am not 100% sure if i got the right codes. my eyes are sensitive to all light.

 

[Maniak]

It can't be 167 AND 157... not enough flashes...

The output is this...

flash...
code1
code1

separator

code2
code2

~Mark