budro574
Member
- Joined
- May 23, 2012
- Messages
- 18
- Reaction score
- 0
- Year, Model & Trim Level
- 1994 explorer sport
Took my truck to the mechanic for an oil change and he lets me know I need bearings on the passenger side. I have been driving it with a bad noise and hard pull to the right, so I replaced inner and outer bearings. It is still very loose at 12 and 6 and at 3 and 9 since the swap. Dont know where to go from here, should I replace the Spindle and hub? I have replaced the front end (tie rods and so on) except for ball joints. I have a 4.5 inch lift kit 33's.