Instructions on replacing the rear output shaft seal on xfer case?

[grey26]

I need to replace the rear output shaft seal on my xfer case. I've done quite a bit of searching and found useful information but haven't come across a step-by-step w/pics set of instructions that includes all the tools I'll need, torque settings, etc. I have the Borg Warner 4405. The tag on the xfer case reads:
AG502 4405-15
209747 YL24-AA

If anybody knows of a thread like this, please post the link for me.
Thanks.

 

[Terkins]

I need to replace the rear output shaft seal on my xfer case. I've done quite a bit of searching and found useful information but haven't come across a step-by-step w/pics set of instructions that includes all the tools I'll need, torque settings, etc. I have the Borg Warner 4405. The tag on the xfer case reads:
AG502 4405-15
209747 YL24-AA

If anybody knows of a thread like this, please post the link for me.
Thanks.

I've got the same xfer case. Have you found any guide(s)? (Please share!)

 

[grey26]

I've got the same xfer case. Have you found any guide(s)? (Please share!)

No, I didn't find a guide. I actually sold my Explorer about a month ago. I'll sure miss that vehicle but after 18 years too many things started crapping out on me and I couldn't justify the costs any more. Good luck on your xfer case!