Joe Dirt's 2000 Ex-El-Tee "Deuce"

[1AJeremyD]

Joe,

Did ya notice a difference in how the leather felt when you were done? I just picked up a car with leather but its colored (red and black) and my only concern is it removing the color. I was looking at some of the meguiars stuff like the aloe cleaners and they seem pretty good.

 

[BrianDye]

I went looking for Magic Erasers after seeing Joe use them on Wedgie. Walgreens has the Multi-Eraser on sale sometimes, two boxes for $3.99 for a total of 8 pads.
The Mr.Clean erasers were $3.99 for 2 pads.
I bought the Walgeens version and they worked fine.

When I did this to my 95, I bought the target pads, there were like 4 to a box for 2$

 

[Joe Dirt]

Jeremy- it honestly depends on the leather. I don't know that I would do red or black. The darker the leather, the more apt you are to have color removal in my experience. Even the dark graphite driver's door panel I did lightly had more streaking than the medium dark graphite panel that I reefed on.

There is a huge difference in the suppleness of the leather after it's been done. Brian and Sean both did it, they know...

The aloe sisters are indeed good products, there is a new leather team of products for 2011 though, I may try it when I run out of original Meg's LCC. The only thing holding me back is that I just never liked leather "sprays" per se.

CLICK

 

[Joe Dirt]

Just to warn, it got seriously out of hand tonight out there in the garage...

 

[NHarris]

Just to warn, it got seriously out of hand tonight out there in the garage...

Doesn't sound too good

 

[lynchy wa]

If it's getting out of hand mate, then you need to grip it tighter!!!

 

[Joe Dirt]

You can only get so much hand/grip on a telephone pole though...

 

[BigRondo]

If it's getting out of hand mate, then you need to grip it tighter!!!

Someone grab that signature. G'day Mate! :

 

[Joe Dirt]

someone also needs to count how many Lynchy-isms are already quoted...

 

[Joe Dirt]

By the way- yes, things got out of hand tonight.

 

[techieman33]

Joe some nice men are going to come over and put you in a nice new white jacket tomorrow morning. Just remember that we all care about you and want the best for you.

 

[BigRondo]

Joe some nice men are going to come over and put you in a nice new white jacket tomorrow morning. Just remember that we all care about you and want the best for you.

Joe, the main thing is that we love you!! :

 

[lynchy wa]

Joe, the main thing is that we love you!! :

And this is going to hurt us more than it hurt's you:

 

[BigRondo]

And this is going to hurt us more than it hurt's you:

It depends if we use the buffer or the polisher.

 

[Albino 94LTD]

By the way- yes, things got out of hand tonight.

I really DON"T want to know where those QTip's have been

 

[lynchy wa]

It depends if we use the buffer or the polisher.


hahaha, lamb's wool or micro fibre? That's a bugger of a decision, mmmm........:scratch:

 

[Joe Dirt]

Ok, today we're going to toss out some Spoon for our viewing music.


Why? After reading the last few posts, all I can say is "Don't you Evah..."







So last night's task was swapping out the whiteface gauges. They just didn't look good to me in that rig. I loved them in Snowball, white truck with tan interior, but the dark blue with gray just looked off to me. Just my personal preference, I suppose. So, I swapped them out with original black with a slight change.

While I had to dismantle the dash, I figured I should clean up in there since it was all apart anyway.

Why?


Because this s**t is disgusting.

Then I remembered- I still have some pin-tip Q's.

Between regular Q's and pin-tips, I can clean everything in there...


So, the cleaning started, including the MFS and gearshift handle

The airbag cover

The headlight indicator cutouts, the vent, and the steering wheel gaps since the airbag was out.



A little APC sprayed on to soften it up, then a pin-tip Q...



I had to-

After 2 grooves:

While I was in there, I also disconnected the stupid dinger wire, taped it up and tucked it under the cowl trim. YES, I did clean the ignition trim. Inside and out. :

A little white lithium, and all is better.

Clean gaps.

Clean airbag cover.

And the cluster- black face, silver trim from a spare white cluster, everything clean.

I told you it got out of hand.

What's the worst part? I spent just over 3 hours on the rig, didn't touch the leather on the wheel or the top dash pad yet, and didn't even get east to the radio bezel or the rest of the dash. :shifty_ey

 

[bcbid]

Joe: You would of made one tough Marine Corps Drill Instructor. Them recruits would of never have gotten their rifles clean enough for your taste. "Let me see your war face"?

 

[Joe Dirt]

 

[Keeper0311]

Joe: You would of made one tough Marine Corps Drill Instructor. Them recruits would of never have gotten their rifles clean enough for your taste. "Let me see your war face"?

x2. I remember trying to get all the carbon out of the chamber. With Joe, I imagine I would be on the quarter deck a long while.